OAccessible returns itself in its XAccessible::getAccessibleContext
implementation and implements the XAccessibleComponent interface itself,
so there is no need to call the method and query for that interface.
Change-Id: I232d86a3c972a8313a6dc62a1b6c799c6b1a9d81
Reviewed-on: https://gerrit.libreoffice.org/c/core/+/210603
Tested-by: Jenkins
Reviewed-by: Michael Weghorn <m.weghorn@posteo.de>
Switch AccessibleChartView::m_xParent from a weak
reference of the abstract XAccessible interface to
a weak reference of the more concrete OAccessible class.
Change-Id: Iba9f410979c079735b6c41723206b2ac76c1dc1b
Reviewed-on: https://gerrit.libreoffice.org/c/core/+/210602
Tested-by: Jenkins
Reviewed-by: Michael Weghorn <m.weghorn@posteo.de>
Switch to using the more concrete OAccessible instead
of the abstract XAccessible UNO interface.
Change-Id: I5ef11c3880788320dda6750409f36a04fcf40a06
Reviewed-on: https://gerrit.libreoffice.org/c/core/+/210601
Reviewed-by: Michael Weghorn <m.weghorn@posteo.de>
Tested-by: Jenkins
Disable the checkbox to save preview image
if the expert config says thumbnails are not allowed to be generated.
Change-Id: I5c2cceffb3f0ac301814b347ce0d3a6eff0cc79f
Reviewed-on: https://gerrit.libreoffice.org/c/core/+/210639
Tested-by: Jenkins
Reviewed-by: Justin Luth <jluth@mail.com>
Since SfxDocumentInfoItem didn't compare m_bUseThumbnailSave
in operator==, it didn't notice that putting *pInfoItem
was different from the previous value.
It also isn't checking m_bUseUserData,
but that doesn't seem to matter in the current implementation
so I'll just leave that absent for now.
Change-Id: Ibd1e5b161a92f659c72b235885a7f01fdd9e4115
Reviewed-on: https://gerrit.libreoffice.org/c/core/+/210634
Tested-by: Jenkins
Reviewed-by: Justin Luth <jluth@mail.com>
Only WinSalInstance overrides that virtual method
and it doesn't use the params. Drop them.
Change-Id: If3fd1130d1b678a253079672586401d48fa9a1c5
Reviewed-on: https://gerrit.libreoffice.org/c/core/+/210593
Tested-by: Jenkins
Reviewed-by: Michael Weghorn <m.weghorn@posteo.de>
Return early in case Application::IsUseSystemEventLoop
returns false, which allows dropping one indentation
level.
Change-Id: Iad385718f9f2bc228c5fc1ba954b63495c878b5d
Reviewed-on: https://gerrit.libreoffice.org/c/core/+/210594
Tested-by: Jenkins
Reviewed-by: Michael Weghorn <m.weghorn@posteo.de>
The table style definition allows for special definitions
for the first and last rows and columns.
That means that the corners are somewhat ambiguous,
so each corner cell can also have a special definition.
However, the corner cell definition only applies
if both that row AND column have a special definition.
Change-Id: Ia5a0ecc2f5cf5ecd0f63e83883a4b693669828e4
Reviewed-on: https://gerrit.libreoffice.org/c/core/+/210612
Tested-by: Jenkins
Reviewed-by: Justin Luth <jluth@mail.com>
drawinglayer/source/tools/emfphelperdata.cxx:771:32: runtime error: load of value 4280295456, which is not a valid value for type 'EmfPlusHatchStyle'
#0 0x7b14dd7d4d02 in emfplushelper::EmfPlusHelperData::EMFPPlusFillPolygon(basegfx::B2DPolyPolygon const&, bool, unsigned int) drawinglayer/source/tools/emfphelperdata.cxx:771:32
#1 0x7b14dd7f903a in emfplushelper::EmfPlusHelperData::processEmfPlusData(SvMemoryStream&, drawinglayer::geometry::ViewInformation2D const&) drawinglayer/source/tools/emfphelperdata.cxx:1776:29
#2 0x7b14dd7c020c in emfplushelper::EmfPlusHelper::processEmfPlusData(SvMemoryStream&, drawinglayer::geometry::ViewInformation2D const&) drawinglayer/source/tools/emfplushelper.cxx:41:14
#3 0x7b14dd932d9d in wmfemfhelper::implInterpretMetafile(GDIMetaFile const&, wmfemfhelper::TargetHolders&, wmfemfhelper::PropertyHolders&, drawinglayer::geometry::ViewInformation2D const&) drawinglayer/source/tools/wmfemfhelper.cxx:2957:43
#4 0x7b14dd919d51 in wmfemfhelper::interpretMetafile(GDIMetaFile const&, drawinglayer::geometry::ViewInformation2D const&) drawinglayer/source/tools/wmfemfhelper.cxx:2993:9
#5 0x7b14dd470d93 in drawinglayer::primitive2d::MetafilePrimitive2D::create2DDecomposition(drawinglayer::geometry::ViewInformation2D const&) const drawinglayer/source/primitive2d/metafileprimitive2d.cxx:42:42
#6 0x7f14fb527e4f in drawinglayer::primitive2d::BufferedDecompositionPrimitive2D::get2DDecomposition(drawinglayer::primitive2d::Primitive2DDecompositionVisitor&, drawinglayer::geometry::ViewInformation2D const&) const drawinglayer/source/primitive2d/BufferedDecompositionPrimitive2D.cxx:90:41
#7 0x7b14dd4727d5 in TestImportWMF drawinglayer/source/primitive2d/metafileprimitive2d.cxx:149:16
so keep the hatch style as the value read from the stream, and an
unknown one then reaches the switch default
Signed-off-by: Caolán McNamara <caolan.mcnamara@collabora.com>
Change-Id: I9725f2f80d3a00fbf82ac5a84cf55b5c071af68b
Reviewed-on: https://gerrit.collaboraoffice.com/c/online/+/11529
Reviewed-by: Noel Grandin <noel.grandin@collabora.com>
Tested-by: Jenkins CPCI <releng@collaboraoffice.com>
(cherry picked from commit 906c713f2cdd05372db04c1d807d31b1fff5377a)
Reviewed-on: https://gerrit.libreoffice.org/c/core/+/210589
Reviewed-by: Xisco Fauli <xiscofauli@libreoffice.org>
Tested-by: Jenkins
reproduce by loading crashtesting (rtf) file:
swxtextframe_createtextcursorbyrange.sample
and exporting it to pdf:
#0 SwContentNode::GetSwAttrSet (this=0x0) at sw/inc/node.hxx:750
#1 SwTextFrame::RecalcAllLines at sw/source/core/text/txtfrm.cxx:4130
#2 SwLayAction::FormatContent at sw/source/core/layout/layact.cxx:1870
#3 SwLayAction::InternalAction at sw/source/core/layout/layact.cxx:640
#4 SwLayAction::Action at sw/source/core/layout/layact.cxx:418
#5 SwViewShell::CalcLayout at sw/source/core/view/viewsh.cxx:990
the frame at #2 has m_pMergedPara 0, GetDep() 0 and mbInDtor true, so
it was freed under the object formatting two statements earlier:
SwFrame::DestroyFrame (the follow)
SwTextFrame::JoinFrame frmform.cxx:778
SwTextFrame::AdjustFollow_ frmform.cxx:681
SwTextFrame::FormatAdjust / Format_ / Format
SwContentFrame::MakeAll calcmove.cxx:1633
SwFrame::Calc (the MASTER)
SwAnchoredDrawObject::MakeObjPosAnchoredAtPara
SwObjectFormatter::FormatObj_
SwObjectFormatterTextFrame::DoFormatObj
SwObjectFormatter::FormatObjsAtFrame_
FormatContent is formatting a follow frame. Placing a drawing object
anchored in that paragraph calls Calc on the master, the master reflows
and takes back its text, and JoinFrame then destroys the follow.
the loop already keeps an SfxDeleteListener on pContentPrev, so keep one
on pContent too and return false, and the caller invalidates the page and
runs it again.
no unit test, the layout tests only have the bundled fonts and this
document asks for Palatino Linotype. Only P052, its metric substitute,
keeps the layout that splits the paragraph, and P052 isn't bundled
either, so the document needs adjusting first.
reached since:
commit ac332d53d565325f3db2697126d97e02a15e4b5d
Date: Wed Aug 26 21:02:06 2026 +0000
crashtesting: pass the collected page number to CheckMovedFwdCondition
which dropped the DoFormatObj assert that used to stop this document
before the object formatting could complete the join.
Signed-off-by: Caolán McNamara <caolan.mcnamara@collabora.com>
Change-Id: I64e95ba6d3a6fda6ab585b5f319be2fb8bca8533
Reviewed-on: https://gerrit.collaboraoffice.com/c/online/+/11273
Reviewed-by: Noel Grandin <noel.grandin@collabora.com>
Tested-by: Jenkins CPCI <releng@collaboraoffice.com>
(cherry picked from commit ab7337476075e0b903ec5cb705821d8b3a14e9f7)
Reviewed-on: https://gerrit.libreoffice.org/c/core/+/210590
Tested-by: Jenkins
Reviewed-by: Xisco Fauli <xiscofauli@libreoffice.org>
Makes hyperlink ordering in Navigator and Navigate By follow the
order of document occurrence including hyperlinks in footnotes and
endnotes.
Previous to this patch hyperlinks in footnotes and endnotes
were always listed first in the Navigator hyperlinks catagory.
Navigate By hyperlinks follow the same order as hyperlinks listed in the
Navigator.
Change-Id: Id28c98d4fa8dc5b7174a3ad2cd803dffb7f5ae93
Reviewed-on: https://gerrit.libreoffice.org/c/core/+/207376
Tested-by: Jenkins
Reviewed-by: Ilmari Lauhakangas <ilmari.lauhakangas@libreoffice.org>
FontSizeMenuController::fillPopupMenu() built a printer and a font list
using it. Neither were used after the change from
pFontList->GetSizeAry() to FontList::GetStdSizeAry().
This construction ran once per context menu activation where it runs
through the printer driver on Windows. Hence, the delay was not present
on Linux.
Change-Id: Ia0d9bd6b789f6b99437e97373421cb13a744a9da
Reviewed-on: https://gerrit.libreoffice.org/c/core/+/210516
Tested-by: Jenkins
Reviewed-by: Andreas Heinisch <andreas.heinisch@yahoo.de>
see on loading forums/xlsx/forum-mso-en4-748529.xlsx and doing a
hard recalculation, which aborts with:
soffice.bin: sc/inc/formulacell.hxx:514: void ScFormulaCell::MaybeInterpret():
Assertion `!rDocument.IsThreadedGroupCalcInProgress()' failed.
#4 ScFormulaCell::MaybeInterpret at sc/inc/formulacell.hxx:514
#5 ScFormulaCell::IsEmpty at sc/source/core/data/formulacell.cxx:3153
#6 FillMatrixHandler::operator() at sc/source/core/data/column2.cxx:2636
#7 sc::ParseBlock at sc/inc/mtvfunctions.hxx:66
#8 ScColumn::FillMatrix at sc/source/core/data/column2.cxx:2708
#9 ScTable::FillMatrix at sc/source/core/data/table1.cxx:2700
#10 ScDocument::FillMatrix at sc/source/core/data/documen8.cxx:400
#11 ScInterpreter::CreateMatrixFromDoubleRef at sc/source/core/tool/interpr5.cxx:386
#12 ScInterpreter::ScSpilledRange at sc/source/core/tool/interpr1.cxx:1703
#13 ScInterpreter::DispatchOpCode at sc/source/core/tool/interpr4.cxx:3868
#14 ScInterpreter::Interpret at sc/source/core/tool/interpr4.cxx:4414
#15 ScFormulaCell::InterpretTail at sc/source/core/data/formulacell.cxx:2209
#16 ScColumn::CalculateInThread at sc/source/core/data/column2.cxx:3270
#17 ScTable::CalculateInColumnInThread at sc/source/core/data/table1.cxx:2740
#18 ScDocument::CalculateInColumnInThread at sc/source/core/data/documen8.cxx:421
#19 Executor::doWork at sc/source/core/data/formulacell.cxx:5463
ScSpilledRange calculates cells itself. It calls MaybeInterpret on the
master cell of the dynamic array, and CreateMatrixFromDoubleRef then
covers the whole spill range, so FillMatrix asks every cell in that
range whether it is empty and IsEmpty calculates it. A worker thread
inside a threaded group calculation must not calculate a cell.
The dependency evaluator can't cover it either, only the operand's own
cell is named by a reference token and how far the spill reaches is
known only once that cell has been calculated
an issue since:
commit 9b97b0fc91bce4b8726ea210347e8ea84270e148
Date: Mon Jul 6 13:09:39 2026 +0000
sc: add the # postfix operator for spilled-range references
Signed-off-by: Caolán McNamara <caolan.mcnamara@collabora.com>
Change-Id: Id58e88d1bd927576e4723dd23bc119673feed108
Reviewed-on: https://gerrit.collaboraoffice.com/c/online/+/11285
Tested-by: Jenkins CPCI <releng@collaboraoffice.com>
Reviewed-by: Tomaž Vajngerl <tomaz.vajngerl@collabora.com>
(cherry picked from commit 89af05e8a5e8ce4ae337e2f0048f670940573930)
Reviewed-on: https://gerrit.libreoffice.org/c/core/+/210542
Tested-by: Jenkins
Reviewed-by: Xisco Fauli <xiscofauli@libreoffice.org>
Qt plugin automatically orders buttons for each platform based on
the button's role, which we derive from the Gtk .ui file's
action-widget response code. But to do that conversion from response
code to Qt button role, we need a standard response.
Without a standard response, the button has no role, and gets ordered
to the right of OK/Cancel buttons on Mac. With the correct role, it
is correctly placed far-left along with the Help button.
Change-Id: I16d3126d4999649e7aa6e72ec5e7b1a25f48c2a3
Reviewed-on: https://gerrit.libreoffice.org/c/core/+/210223
Reviewed-by: Michael Weghorn <m.weghorn@posteo.de>
Reviewed-by: Dan Williams <dcbw@libreoffice.org>
Tested-by: Jenkins
Button response IDs are parsed late in the process of building a widget layout
from .ui files because they have their own section at the end. They show up
via QtBuilder::set_response() long after the button has been added to its
QDialogButtonBox. There appears to be no API to set a button's response after
it's already been added, so we need to re-add the button when we finally know
its response ID. The button box will then remove and re-add the button in
the right platform-specific order based on the response ID.
Pull out the button box adding logic to a separate function so we can do
the same thing from the two places it's required.
Change-Id: I29527eabcf68105b5e8c6fbffd4ca3822b7a5acb
Reviewed-on: https://gerrit.libreoffice.org/c/core/+/206476
Reviewed-by: Michael Weghorn <m.weghorn@posteo.de>
Tested-by: Jenkins
Reviewed-by: Dan Williams <dcbw@libreoffice.org>
Michael Weghorn