A correlation circle plot reads the ends of its range differently from every
other chart type: the last two columns are the dimensions its points are placed
against and the columns before them are the features. One range holds the lot,
so nothing about the entry gives that away, and a reader who does not already
know it has no way to work it out.
Display a information label under the range input saying the last two
columns of it are component dimensions and the columns before that are
features.
Change-Id: Ib7d27aad189f12be188f61b1fc317dd1e718b803
Signed-off-by: Dennis Francis <dennis.francis@collabora.com>
Reviewed-on: https://gerrit.collaboraoffice.com/c/online/+/8105
Tested-by: Tomaž Vajngerl <tomaz.vajngerl@collabora.com>
Reviewed-by: Tomaž Vajngerl <tomaz.vajngerl@collabora.com>
(cherry picked from commit 2cbf62e18df956ed23c77932cd5e38424e7baa1f)
Reviewed-on: https://gerrit.libreoffice.org/c/core/+/210470
Reviewed-by: Xisco Fauli <xiscofauli@libreoffice.org>
Tested-by: Jenkins
The entry sits next to the bubble chart, under the same switch that keeps the
chart types wanting free x values out of the list where they do not belong. It
has one sub type, no three dimensional look and no stacking.
The two images are placeholders: a circle with a cross and a few arrows
out of the middle. They need a designer's hand before this ships.
A test drives the wizard the way a user would: it picks the type, types one
range whose last two columns hold the dimensions, and checks that every column
before them became a series holding that column beside the two dimension
columns. A second test reopens the ranges of that chart and checks the range
comes back as it was given.
Change-Id: If8b5275244a2456a22235a6ce2d3d51fcff6cb94
Signed-off-by: Dennis Francis <dennis.francis@collabora.com>
Reviewed-on: https://gerrit.collaboraoffice.com/c/online/+/8104
Reviewed-by: Tomaž Vajngerl <tomaz.vajngerl@collabora.com>
Tested-by: Tomaž Vajngerl <tomaz.vajngerl@collabora.com>
(cherry picked from commit 7a7fc603047e065ebbc20f8bc5dc814d6079e082)
Reviewed-on: https://gerrit.libreoffice.org/c/core/+/210469
Reviewed-by: Xisco Fauli <xiscofauli@libreoffice.org>
Tested-by: Jenkins
A correlation circle plot shows how each feature of a table relates to the
first two dimensions of a decomposition of that table, which a user can now
work out in a spreadsheet with MSVD. One point per feature sits at the
correlation of that feature with the first dimension across and with the
second dimension up, inside a circle of radius one.
The data arrives as one series per feature. Each series holds its own feature
column under the new role values-feature, together with the two dimension
columns under values-x and values-y, which every series shares the way the
bubble chart shares its x column. Keeping the dimensions on the x and y roles
means the point count, the axis scaling and the label machinery need no
special case, and the series label comes from the feature column header, so
the legend and the point labels read as feature names.
The interpreter reads a flat list of columns as a feature table followed by
two dimension columns: the last two are the dimensions and every column before
them is a feature. One range holds the lot, which is what the wizard hands
over, and it is also the order the list comes in when a chart of another type
is turned into this one. A first column of instance names is kept out of the
features when the range says it has them, as it is for a bubble chart.
Both dimensions are numbers running from minus one to one, so the chart type
joins the scatter and the bubble chart in asking for a numeric axis across.
That answer is also what turns the axis of names back into a numeric one when
a chart of another type becomes this one, since the coordinate system the
other type left behind is kept and reused.
Change-Id: Id17d3a2a235c849c3dab9768159ddf1608da6d05
Signed-off-by: Dennis Francis <dennis.francis@collabora.com>
Reviewed-on: https://gerrit.collaboraoffice.com/c/online/+/8102
Tested-by: Tomaž Vajngerl <tomaz.vajngerl@collabora.com>
Reviewed-by: Tomaž Vajngerl <tomaz.vajngerl@collabora.com>
(cherry picked from commit b30d992bba26428941f47f952baf338df3763065)
Reviewed-on: https://gerrit.libreoffice.org/c/core/+/209379
Reviewed-by: Xisco Fauli <xiscofauli@libreoffice.org>
Tested-by: Jenkins
This commit introduces the structural foundation and user interface for
the new Histogram chart type. The rendering engine gracefully falls
back to plotting the raw values-y input data directly. As a result, the
chart currently renders identically to a standard bar/column chart.
- Adds UI entries in the Chart Type dialog.
- Adds HistogramChart to the view layer, inheriting from BarChart and
forcing a 0-gap width.
Change-Id: Ica5b15e9b7428d6c908e1b978259367fe8ff7aab
(cherry picked from commit 14a4a09b62fc283f9b629a2a317156efa6509054)
Signed-off-by: Devansh Varshney <varshney.devansh614@gmail.com>
Reviewed-on: https://gerrit.collaboraoffice.com/c/online/+/1878
Reviewed-by: Tomaž Vajngerl <tomaz.vajngerl@collabora.com>
Tested-by: Jenkins CPCI <releng@collaboraoffice.com>
(cherry picked from commit 508c3456e85a88771ac5e264cee9460274685a22)
Reviewed-on: https://gerrit.libreoffice.org/c/core/+/203741
Tested-by: Jenkins
Reviewed-by: Xisco Fauli <xiscofauli@libreoffice.org>
Add clearer handling for chartex types whose rendering is not currently
supported. Previously, unsupported types defaulted to being rendered as
line charts, which could lead to confusion. With this commit, we instead
display a message stating that the chart type is not supported, and do
not attempt to render it.
Note that at this time, the message is hard-coded only in English
language text. In the short term it should be internationalised, though
in the longer term, the intent is that all chart types will be properly
rendered.
Change-Id: I66eecb3368abaf228d80c21ab664a1eb2b45ae32
Reviewed-on: https://gerrit.libreoffice.org/c/core/+/197128
Tested-by: Jenkins
Reviewed-by: Tomaž Vajngerl <quikee@gmail.com>
This commit moves bar-of-pie and pie-of-pie chart types into a separate
line in the chart type selection UI from 'plain' pie chart types. This
allows for separate UI controls, including a spin button added in this
commit for of-pie types to specify the number of entries to be included
in the composite wedge and broken out in the right-hand subchart. Per
discussion in this and related bugs, this may not be the long-term best
approach for specifying which entries go into the composite, and it
still only allows for the last entries in the composite. But it is a
step towards allowing greater control.
I've also changed the default number in the composite from 3 to 2, to
better match MSO.
I/O of the 'number in the composite wedge' parameter is not included
in this commit. Implementing that for ODF and OOXML perhaps should be
a separate bug or bugs.
Change-Id: If4afc1417ea94c15e86a9a4dfe967a6f8ecb7ca8
Reviewed-on: https://gerrit.libreoffice.org/c/core/+/168690
Tested-by: Jenkins
Reviewed-by: Heiko Tietze <heiko.tietze@documentfoundation.org>
- Add the Histogram selection to the UI
- Histogram bars showing with No Gap
- Convert X and Y axis to group data into bins and frequency
- Adjusted failing UI test (tdf138556) as a new chart type was added
Change-Id: Id1f161adac943ead5e17c7fbb7e14c9ab7f1655e
Reviewed-on: https://gerrit.libreoffice.org/c/core/+/167068
Tested-by: Jenkins
Reviewed-by: Tomaž Vajngerl <quikee@gmail.com>
...by moving the char8_t -> char reinterpret_cast out of any potential constexpr
paths into a new TranslateId::getId. And demonstrate constexpr'ability by
making the aCategories var in OApplicationIconControl::Fill
(dbaccess/source/ui/app/AppIconControl.cxx) constexpr. (And there might be more
such cases that could now be made constexpr.)
Change-Id: I0b4e3292faf8f6b901f9b9e934e1aa6bf0f583ff
Reviewed-on: https://gerrit.libreoffice.org/c/core/+/157862
Tested-by: Jenkins
Reviewed-by: Stephan Bergmann <sbergman@redhat.com>
This adds a new object type "Data Table", with all the object
identifiers and converters of properties.
The data table is now shown in the drop-down of chart elements.
A properties dialog was added, which allows to change properties
of a data table. This contains the area, line and font tab pages
and a new tab page specific for data tables, to change if the
horiz. or vert. borders, key or the outline should be show.
Change-Id: I9b4cd58cffbcc952daaa2c0c8f8a5a17e38ac293
Reviewed-on: https://gerrit.libreoffice.org/c/core/+/138246
Tested-by: Jenkins
Reviewed-by: Tomaž Vajngerl <quikee@gmail.com>
- enable data range toolbar button for charts with internal
data table and possiblilty to switch to data range
- show warning before destoying data table
- recreation of data provider
Change-Id: I2a08b723be80d411e970bfe2ee53dee7d3d52faa
Reviewed-on: https://gerrit.libreoffice.org/44605
Reviewed-by: Katarina Behrens <Katarina.Behrens@cib.de>
Reviewed-by: Thorsten Behrens <Thorsten.Behrens@CIB.de>
Tested-by: Thorsten Behrens <Thorsten.Behrens@CIB.de>
* all .ui files go from <interface> to <interface domain="MODULE"> e.g. vcl
* all .src files go away and the english source strings folded into the .hrc as NC_("context", "source string")
* ResMgr is dropped in favour of std::locale imbued by boost::locale::generator pointed at matching
MODULE .mo files
* UIConfig translations are folded into the module .mo, so e.g. UIConfig_cui
goes from l10n target to normal one, so the res/lang.zips of UI files go away
* translation via Translation::get(hrc-define-key, imbued-std::locale)
* python can now be translated with its inbuilt gettext support (we keep the name strings.hrc there
to keep finding the .hrc file uniform) so magic numbers can go away there
* java and starbasic components can be translated via the pre-existing css.resource.StringResourceWithLocation
mechanism
* en-US res files go away, their strings are now the .hrc keys in the source code
* remaining .res files are replaced by .mo files
* in .res/.ui-lang-zip files, the old scheme missing translations of strings
results in inserting the english original so something can be found, now the
standard fallback of using the english original from the source key is used, so
partial translations shrink dramatically in size
* extract .hrc strings with hrcex which backs onto
xgettext -C --add-comments --keyword=NC_:1c,2 --from-code=UTF-8 --no-wrap
* extract .ui strings with uiex which backs onto
xgettext --add-comments --no-wrap
* qtz for gettext translations is generated at runtime as ascii-ified crc32 of
content + "|" + msgid
* [API CHANGE] remove deprecated binary .res resouce loader related uno apis
com::sun::star::resource::OfficeResourceLoader
com::sun::star::resource::XResourceBundleLoader
com::sun::star::resource::XResourceBundle
when translating strings via uno apis
com.sun.star.resource.StringResourceWithLocation
can continue to be used
Change-Id: Ia2594a2672b7301d9c3421fdf31b6cfe7f3f8d0a
Andrea Gelmini