This adds drawing the wave line (typically used to underline the
wrongly spelled words) with bezier curves. Previously the wave
lines were drawn with drawing pixels, which didn't look that good,
especially on HiDPI display, so the looks of wave lines now is
therefor much better.
The creation of the wave line as a polygon has been added to the
basegfx module, so it can be reused if needed.
In addition, everytime we draw the waveline, we have to enable
antialiasing, to have a much better quality of the curves. By
default the antialiasing is disabled for some reason.
This also adds ScopedStates.hxx file which currently includes
ScopedAntialiasing, which sets the antialiasing to a certain state
for the time the object is in scope, and then sets it back to the
original state.
Change-Id: I4b866fc5d69725eb7f6f78a1acf4176b1205aa73
Reviewed-on: https://gerrit.libreoffice.org/74810
Tested-by: Jenkins
Reviewed-by: Tomaž Vajngerl <quikee@gmail.com>
...since b62826ad38 "Remove more unused methods"
BPixel was marked BASEGFX_DLLPUBLIC, but all its member functions are defined
inline in include/basegfx/pixel/bpixel.hxx, and basegfx/source/pixel/bpixel.cxx
was the only .cxx from Library_basegfx that included it. So on Windows, non-
inline implementations of the BPixel member functions are no longer exported
from Library_basegfx, even though code in drawinglayer using BPixel expects that
(and would thus start to fail to link on Windows). So just not mark that all-
inline BPixel class as DLLPUBLIC.
Change-Id: I7553a7ac5a57b5d175d7c81b3908ad7b80b064c3
Reviewed-on: https://gerrit.libreoffice.org/66043
Tested-by: Jenkins
Reviewed-by: Stephan Bergmann <sbergman@redhat.com>
This is a first step to allow buffering of system
dependent data, especially (but not only) for the
system-dependent implementations of graphic output.
For example, for B2DPolygon and Win output, it allows
buffering the Gdiplus::GraphicsPath instead of re-
creating it all the time.
To support that, the change includes forwarding the
current transformation to the renderers in SalGraphics.
The current state in VCL is to transform all and
everything to device coordinates at every single
paint.
I have currently started to do this for ::drawPolyLine
implementations. The fallbacks for all systems will
at the start of that method just transform the data
to device coordinates, so all works as before.
This may also be done for FilledPolygon paint in a later
step, but most urgent is FatLine painting.
An arrangement of shared_ptr/weak_ptr is used so that
either the instance buffering (in the example B2DPolygon)
or the instance managing it can delete it. The instance
managing it currently uses a 1s Timer and a cycle-lifetime
management, but that can be extended in the future
to e.g. include size hints, too.
The mechanism it designed to support multiple Data per
buffering element, e.g. for B2DPolygon at the same time
system-dependent instances of Gdiplus and Cairo can be
buffered, but also PDF-data.
This is achieved semi-automatic by using
typeid(class).hash_code() as key for organization.
The mechanism will be used for now at B2DPolygon, but
is not limited to. There is already a similar but less
general buffer (see GdiPlusBuffer) that can and will
be converted to use this new mechanism.
Added vcl/headless Cairo renderer to support given
ObjectToDevice transformation (not to transform given
B2DPolygon)
Added support for CairoPath buffered at B2DPolygon,
seems to work well. Need to do more tests
Moved usage to templates suggested by Noel Grandin
(Noel Grandin <noelgrandin@gmail.com>), thanks for
these suggestions. Adapted Win usage to that, too.
Converted Win-specific GdiPlus BitmapBuffer to new
mechanism, works well. Checked, the manager holds
now a mix of bitmap and path data under Win
Added a cleanup mechanism to flush all buffered data
at DeInitVCL() using flushAll() at
SystemDependentDataBuffer
Adapted Linux-versions of ::drawPolyLine to support
PixelSnapHairline, for now in a simplified version
that still allows buffering. This will also be used
(and use buffering) for the Cairo-fallback in
X11SalGraphics
Change-Id: I88d7e438a20b96ddab7707050893bdd590c098c7
Reviewed-on: https://gerrit.libreoffice.org/59555
Tested-by: Armin Le Grand <Armin.Le.Grand@cib.de>
Reviewed-by: Armin Le Grand <Armin.Le.Grand@cib.de>
SvxShapePolyPolygonBezier was an implementation for the UNO
Shape group of polygons with bezier parts (filled/unfilled/
closed/open), e.g. com.sun.star.drawing.OpenBezierShape.
It was differing from SvxShapePolyPolygon just by supporting
drawing::PolyPolygonBezierCoords instead of the simple
drawing::PointSequenceSequence and some details.
This leads to problems - the ShapeType *does change* e.g.
when you edit a non-bezier Shape in Draw/Impress and change
parts to curve (also when closing, see ShapeTypes above).
This is why SvxShape::getShapeType() already detects this
identifier by using thze internal ShapePolyType (e.g.
OBJ_PATHLINE).
So there is no reason to have two separate UNO API imple-
mentations for sthe same type of SvxShape at all. Get rid
of the extra one and unify this implementation detail.
Also cleaned up double basegfx tooling for conversions of
UNO API Poly/bezier data and B2DPolygon.
Adapted test for "tdf113946.docx", see comment there.
Adapted test for "tdf90097.rtf", see comment there. Also
needed to use the Linux values, also check comment there.
Adapted test for "tdf105127.docx", see comment there.
Adapted test for "tdf85232.docx", see comment there.
Had to fic a problem with test for "tdf96674.docx"- the
adaption of the RotateAngle for line objects goes havoc
together with the UNO API when scaling is involved. That
old aGeo rotate stuff just kills the existing rotation due
to numerical inprecise stuff. The UNP API - in trying not
just to apply a rptation, but manipulate the existing one
then goes wrong in not re-getting the current rotation
value anymore. ARGH! This is the original reason for the
ols tdf#96674 task - i doubt that the additional code to
make a line not exactly hor/ver is needed.
Checked and it is not needed, thus removed the change from
tdf#96674 in shape.cxx.
Change-Id: I2bb8d4cfe33fee3671f3dad60e5c18609a394f9d
Reviewed-on: https://gerrit.libreoffice.org/56614
Tested-by: Jenkins
Reviewed-by: Armin Le Grand <Armin.Le.Grand@cib.de>
SOSAW080: Make SdrModel& prerequisite to SdrObjects
Added need for SdrModel& in constructors of SdrModel,
SdrPage, SdrView and SdrObjList. Builds, not finished.
SOSAW080: removed and replaced old SdrModel
Removed and replaced GetModel()/SetModel() in all using
classes (SdrObject, SdrPage, SdrView), added accessors
to new referenced SdrModel, adapted all accessing places.
Refactored/Extended ::Clone and ::operator== for these
classes to allow cloning objects to a target SdrModel.
Adapted places where this is done AFAP. Added quite some
comments (tagged with 'TTTT') where possible further work
is needed. Builds completely, thus checking in. This does
not mean that this change is done yet.
SOSAW080: Adapted SdrPage/SdrModel relationship
Also needed to work on copy-construction of SdrPage and hierarchy,
quite some stuff removed, no copy-constructor anymore, no
MigrateItemPool stuff. Builds well, test stuck, will need
some cleanup/finetunung
SOSAW080: Smaller corrections/includes adapted
SOSAW080: Smaller corrections/includes adapted
SOSAW080: Debugging/Stabilizing/MakeUnitTestWork
SOSAW080: Stabilized for UnitTests, cleanups
SOSAW080: Adapted GetObjGraphic to just take a const SdrObject&
SOSAW080: Removed ChangeModel from classes
Classes SvxTextEditSource and SvxDrawPage (including
TextEditSource stuff) do not need change of SdrModel
anymore.
SOSAW080: Adapted some comments to make more readable
SOSAW080: Corrected constructor
SOSAW080: getSdrModelFromUnoModel added override marks
SOSAW080: Added missing includes
SOSAW080: Corrected SdrPage constructor
SOSAW080: Corrected some SdrObject::Clone scenarios
Especially when cloning to another SdrModel and taking
the sdr::properties into account.
SOSAW080: Added include for Mac-Build
SOSAW080: Added Scale to DefaultProperties
If a SdrModel change happens in DefaultProperties copy
constructor (used from Clone()), potentially a Scale
for the SfxItems has to be done.
SOSAW080: Added missing include for MacBuild
SOSAW080: Corrected CppunitTest_sc_anchor_test
An adaption of a SdrPathObj instantiation was missing,
added that. Seems as if that test is no tpart of the
usual 'make' scenario, but used/executed in gerrit builds
SOSAW080: Reworked SvxShape to use SdrObject's SdrModel
SOSAW080: Reworked SvxShape to use SdrObject's SdrModel
SOSAW080: Free SdrObjects when SdrModel goes down
In an UNO API test problem is that SvxShapes reference
SdrShapes, but these are not added to a SdrPage and not
'owned' by the SvxShape. Thus these do not get deleted
at all (same in master, memory leak). I extended
SvxShape::Notify the case for ModelCleared to also
Free the SdrObject when not owner and it's not added to
a SdrPage (in that case it gets deleted with deleting
the SdrModel)
SOSAW080: Solve UNO API calls that move SvxShapes to other Model
Due to UNO API tests I got a call to insert an xShape to a
xDrawPage which was constructed in another Model, this has now to
be done by Cloning the SdrObject to the new SdrModel, getting
rid of the old one and getting all the UNO implementation
stuff right (referemces SdrObject <-> xShape).
1cb7d573d323e98a89761fe662c10c4a654fdec0
24617494a0ef79f6e33dfcb02782a833a81c6434
763f39094b6a48b529a6952d01468f8776c97679
242b9e228a9a042c3a5bdd38b1ea6600144276d5
242b9e228a9a042c3a5bdd38b1ea6600144276d5
33a6f3f306b70c223171aef796dd5ee041ad14df
6878b33f8b05738a44c0910e40a60a0f0d1d58ed
0a636caf3cb36c2f9c6cd11aa22cb9bc435dc8f2
8c4626274a5cc531dad27f27c0c45d4c528fb2fb
446685a49a6d67aedd01cfbbd5e87b07f97a4d7b
c1b5ed3c99bc7219a0061e4ece24ea42afd2889a
22de9a1c8af7c25be5c108671ddc548ba323ed47
4caf6b6fbbe6e8130741d793dffb560fd01d4ed5
488b9601735ec1822433f82f633990063951fe08
c366d60299f239e3df856ddffedb19e743e4be0c
c5137ba8c597c7b5f90318df50e87b93a39a28dc
f9e646242cf89f6fde1315046952252a2c429779
f830fbc5fadd89d04be5edd2a5abf9b0d4bf0410
1694b54903df784385abaa8452e1201e12344238
17bcb44d2e29920c0c74430c2d9c703b36cfa0ad
17bcb44d2e29920c0c74430c2d9c703b36cfa0ad
7b5c241faec7488924e5935ae8b19f785846b5e4
bf097ee7467895823fbd158a2a9543da3b5a5078
Change-Id: Iaf53535de0502a481466be74a1768bbb39f0e78c
Reviewed-on: https://gerrit.libreoffice.org/52526
Tested-by: Jenkins <ci@libreoffice.org>
Reviewed-by: Armin Le Grand <Armin.Le.Grand@cib.de>
SOSAW080: Make SdrModel& prerequisite to SdrObjects
Added need for SdrModel& in constructors of SdrModel,
SdrPage, SdrView and SdrObjList. Builds, not finished.
SOSAW080: removed and replaced old SdrModel
Removed and replaced GetModel()/SetModel() in all using
classes (SdrObject, SdrPage, SdrView), added accessors
to new referenced SdrModel, adapted all accessing places.
Refactored/Extended ::Clone and ::operator== for these
classes to allow cloning objects to a target SdrModel.
Adapted places where this is done AFAP. Added quite some
comments (tagged with 'TTTT') where possible further work
is needed. Builds completely, thus checking in. This does
not mean that this change is done yet.
SOSAW080: Adapted SdrPage/SdrModel relationship
Also needed to work on copy-construction of SdrPage and hierarchy,
quite some stuff removed, no copy-constructor anymore, no
MigrateItemPool stuff. Builds well, test stuck, will need
some cleanup/finetunung
SOSAW080: Smaller corrections/includes adapted
SOSAW080: Smaller corrections/includes adapted
SOSAW080: Debugging/Stabilizing/MakeUnitTestWork
SOSAW080: Stabilized for UnitTests, cleanups
SOSAW080: Adapted GetObjGraphic to just take a const SdrObject&
SOSAW080: Removed ChangeModel from classes
Classes SvxTextEditSource and SvxDrawPage (including
TextEditSource stuff) do not need change of SdrModel
anymore.
SOSAW080: Adapted some comments to make more readable
SOSAW080: Corrected constructor
SOSAW080: getSdrModelFromUnoModel added override marks
SOSAW080: Added missing includes
SOSAW080: Corrected SdrPage constructor
SOSAW080: Corrected some SdrObject::Clone scenarios
Especially when cloning to another SdrModel and taking
the sdr::properties into account.
SOSAW080: Added include for Mac-Build
SOSAW080: Added Scale to DefaultProperties
If a SdrModel change happens in DefaultProperties copy
constructor (used from Clone()), potentially a Scale
for the SfxItems has to be done.
SOSAW080: Added missing include for MacBuild
SOSAW080: Corrected CppunitTest_sc_anchor_test
An adaption of a SdrPathObj instantiation was missing,
added that. Seems as if that test is no tpart of the
usual 'make' scenario, but used/executed in gerrit builds
SOSAW080: Reworked SvxShape to use SdrObject's SdrModel
SOSAW080: Reworked SvxShape to use SdrObject's SdrModel
SOSAW080: Free SdrObjects when SdrModel goes down
In an UNO API test problem is that SvxShapes reference
SdrShapes, but these are not added to a SdrPage and not
'owned' by the SvxShape. Thus these do not get deleted
at all (same in master, memory leak). I extended
SvxShape::Notify the case for ModelCleared to also
Free the SdrObject when not owner and it's not added to
a SdrPage (in that case it gets deleted with deleting
the SdrModel)
SOSAW080: Solve UNO API calls that move SvxShapes to other Model
Due to UNO API tests I got a call to insert an xShape to a
xDrawPage which was constructed in another Model, this has now to
be done by Cloning the SdrObject to the new SdrModel, getting
rid of the old one and getting all the UNO implementation
stuff right (referemces SdrObject <-> xShape).
Change-Id: Iaf53535de0502a481466be74a1768bbb39f0e78c
1cb7d573d323e98a89761fe662c10c4a654fdec0
24617494a0ef79f6e33dfcb02782a833a81c6434
763f39094b6a48b529a6952d01468f8776c97679
242b9e228a9a042c3a5bdd38b1ea6600144276d5
242b9e228a9a042c3a5bdd38b1ea6600144276d5
33a6f3f306b70c223171aef796dd5ee041ad14df
6878b33f8b05738a44c0910e40a60a0f0d1d58ed
0a636caf3cb36c2f9c6cd11aa22cb9bc435dc8f2
8c4626274a5cc531dad27f27c0c45d4c528fb2fb
446685a49a6d67aedd01cfbbd5e87b07f97a4d7b
c1b5ed3c99bc7219a0061e4ece24ea42afd2889a
22de9a1c8af7c25be5c108671ddc548ba323ed47
4caf6b6fbbe6e8130741d793dffb560fd01d4ed5
488b9601735ec1822433f82f633990063951fe08
c366d60299f239e3df856ddffedb19e743e4be0c
c5137ba8c597c7b5f90318df50e87b93a39a28dc
f9e646242cf89f6fde1315046952252a2c429779
f830fbc5fadd89d04be5edd2a5abf9b0d4bf0410
1694b54903df784385abaa8452e1201e12344238
17bcb44d2e29920c0c74430c2d9c703b36cfa0ad
17bcb44d2e29920c0c74430c2d9c703b36cfa0ad
7b5c241faec7488924e5935ae8b19f785846b5e4
bf097ee7467895823fbd158a2a9543da3b5a5078
Basegfx gets a basegfx::tools::number2PolyPolygon method that
converts a number 0-9 into a 7-segment digit display polygon.
Change-Id: I4d3326c9fe9e42d07a6248781127f19ac27d8b72
- do not use gb_UnpackedTarball_copy_header_files for boost
- adapt the optimization in concat-deps.c for new path
- use boost_headers in all LinkTargets that require it
- add explicit include paths to mysqlc, mysqlcppconn, libvisio, liborcus
Change-Id: I0c43e73ed43cc9d2e6bce8faf55e992d655a0bb9
Always link in gb_STDLIBS, except when the library explicitly opts out
with gb_LinkTarget_disable_standard_system_libs.
Change-Id: I489a99114fbfa46d0421a27cf6c7b899dc268a4a
Naming convention for gbuild methods:
- "add" is used for stuff that is logically a part of the target
(i.e. not registered at the Module, but defined in the target's makefile)
- "use" is used for stuff that is logically a different target
(i.e. it is registered at the Module, has it's own makefile, may be
in a different module than the target)
Round zoom values beginning with 50 to a multiple of 5, with 100 to one
of 10, with 500 to one of 50 and with 1000 to one of 100.
The step 100 is enforced to have one fixed point.
Armin Le Grand (allotropia)