Stephan Bergmann
9adcf67c9b
...(that was defined iff OSL_DEBUG_LEVEL >= 2) and replace its uses with OSL_DEBUG_LEVEL directly Change-Id: I807c15a02cc8ced9852287df0afb4808761d19d2 Reviewed-on: https://gerrit.libreoffice.org/c/core/+/165067 Tested-by: Jenkins Reviewed-by: Stephan Bergmann <stephan.bergmann@allotropia.de>
395 lines
18 KiB
C++
395 lines
18 KiB
C++
/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
|
|
/*
|
|
* This file is part of the LibreOffice project.
|
|
*
|
|
* This Source Code Form is subject to the terms of the Mozilla Public
|
|
* License, v. 2.0. If a copy of the MPL was not distributed with this
|
|
* file, You can obtain one at http://mozilla.org/MPL/2.0/.
|
|
*
|
|
* This file incorporates work covered by the following license notice:
|
|
*
|
|
* Licensed to the Apache Software Foundation (ASF) under one or more
|
|
* contributor license agreements. See the NOTICE file distributed
|
|
* with this work for additional information regarding copyright
|
|
* ownership. The ASF licenses this file to you under the Apache
|
|
* License, Version 2.0 (the "License"); you may not use this file
|
|
* except in compliance with the License. You may obtain a copy of
|
|
* the License at http://www.apache.org/licenses/LICENSE-2.0 .
|
|
*/
|
|
|
|
#include <drawingml/customshapeproperties.hxx>
|
|
#include <oox/helper/propertymap.hxx>
|
|
#include <oox/helper/propertyset.hxx>
|
|
#include <oox/token/properties.hxx>
|
|
#include <oox/token/tokenmap.hxx>
|
|
#include <com/sun/star/awt/Rectangle.hpp>
|
|
#include <com/sun/star/awt/Size.hpp>
|
|
#include <com/sun/star/beans/PropertyValues.hpp>
|
|
#include <com/sun/star/beans/XPropertySet.hpp>
|
|
#include <com/sun/star/drawing/EnhancedCustomShapeAdjustmentValue.hpp>
|
|
#include <com/sun/star/drawing/EnhancedCustomShapeTextFrame.hpp>
|
|
#include <com/sun/star/drawing/XEnhancedCustomShapeDefaulter.hpp>
|
|
#include <com/sun/star/drawing/XShape.hpp>
|
|
#include <comphelper/sequence.hxx>
|
|
#include <o3tl/string_view.hxx>
|
|
#include <sal/log.hxx>
|
|
|
|
#include <algorithm>
|
|
|
|
using namespace ::com::sun::star;
|
|
using namespace ::com::sun::star::uno;
|
|
using namespace ::com::sun::star::beans;
|
|
using namespace ::com::sun::star::drawing;
|
|
|
|
namespace oox::drawingml {
|
|
|
|
CustomShapeProperties::CustomShapeProperties()
|
|
: mnShapePresetType ( -1 )
|
|
, mbShapeTypeOverride(false)
|
|
, mbMirroredX ( false )
|
|
, mbMirroredY ( false )
|
|
, mnTextPreRotateAngle ( 0 )
|
|
, mnTextCameraZRotateAngle ( 0 )
|
|
, mnArcNum ( 0 )
|
|
{
|
|
}
|
|
|
|
OUString CustomShapeProperties::getShapePresetTypeName() const
|
|
{
|
|
return StaticTokenMap().getUnicodeTokenName(mnShapePresetType);
|
|
}
|
|
|
|
sal_Int32 CustomShapeProperties::SetCustomShapeGuideValue( std::vector< CustomShapeGuide >& rGuideList, const CustomShapeGuide& rGuide )
|
|
{
|
|
std::vector<CustomShapeGuide>::size_type nIndex = 0;
|
|
for( ; nIndex < rGuideList.size(); nIndex++ )
|
|
{
|
|
if ( rGuideList[ nIndex ].maName == rGuide.maName )
|
|
break;
|
|
}
|
|
if ( nIndex == rGuideList.size() )
|
|
rGuideList.push_back( rGuide );
|
|
return static_cast< sal_Int32 >( nIndex );
|
|
}
|
|
|
|
// returns the index into the guidelist for a given formula name,
|
|
// if the return value is < 0 then the guide value could not be found
|
|
sal_Int32 CustomShapeProperties::GetCustomShapeGuideValue( const std::vector< CustomShapeGuide >& rGuideList, std::u16string_view rFormulaName )
|
|
{
|
|
// traverse the list from the end, because guide names can be reused
|
|
// and current is the last one
|
|
// see a1 guide in gear6 custom shape preset as example
|
|
sal_Int32 nIndex = static_cast< sal_Int32 >( rGuideList.size() ) - 1;
|
|
for( ; nIndex >= 0; nIndex-- )
|
|
{
|
|
if ( rGuideList[ nIndex ].maName == rFormulaName )
|
|
break;
|
|
}
|
|
|
|
return nIndex;
|
|
}
|
|
|
|
bool CustomShapeProperties::representsDefaultShape() const
|
|
{
|
|
return !((getShapePresetType() >= 0 || maPath2DList.size() > 0) &&
|
|
getShapePresetType() != XML_Rect &&
|
|
getShapePresetType() != XML_rect);
|
|
}
|
|
|
|
CustomShapeProperties::PresetDataMap CustomShapeProperties::maPresetDataMap;
|
|
|
|
void CustomShapeProperties::pushToPropSet(
|
|
const Reference < XPropertySet >& xPropSet, const awt::Size &aSize )
|
|
{
|
|
if ( mnShapePresetType >= 0 )
|
|
{
|
|
SAL_INFO("oox.drawingml", "preset: " << mnShapePresetType);
|
|
|
|
if (maPresetDataMap.empty())
|
|
initializePresetDataMap();
|
|
|
|
PropertyMap aPropertyMap;
|
|
PropertySet aPropSet( xPropSet );
|
|
|
|
if (maPresetDataMap.find(mnShapePresetType) != maPresetDataMap.end())
|
|
{
|
|
SAL_INFO(
|
|
"oox.drawingml",
|
|
"found property map for preset: " << mnShapePresetType);
|
|
|
|
aPropertyMap = maPresetDataMap[mnShapePresetType];
|
|
#if OSL_DEBUG_LEVEL >= 2
|
|
aPropertyMap.dumpCode( aPropertyMap.makePropertySet() );
|
|
#endif
|
|
}
|
|
|
|
aPropertyMap.setProperty( PROP_MirroredX, mbMirroredX );
|
|
aPropertyMap.setProperty( PROP_MirroredY, mbMirroredY );
|
|
aPropertyMap.setProperty( PROP_TextPreRotateAngle, mnTextPreRotateAngle );
|
|
aPropertyMap.setProperty( PROP_TextCameraZRotateAngle, mnTextCameraZRotateAngle );
|
|
if (moTextAreaRotateAngle.has_value())
|
|
aPropertyMap.setProperty(PROP_TextRotateAngle, moTextAreaRotateAngle.value());
|
|
if (!maExtrusionPropertyMap.empty())
|
|
{
|
|
Sequence< PropertyValue > aExtrusionSequence = maExtrusionPropertyMap.makePropertyValueSequence();
|
|
aPropertyMap.setAnyProperty( PROP_Extrusion, css::uno::Any(aExtrusionSequence));
|
|
}
|
|
Sequence< PropertyValue > aSeq = aPropertyMap.makePropertyValueSequence();
|
|
aPropSet.setProperty( PROP_CustomShapeGeometry, aSeq );
|
|
|
|
if ( !maAdjustmentGuideList.empty() )
|
|
{
|
|
static constexpr OUString sCustomShapeGeometry(u"CustomShapeGeometry"_ustr);
|
|
static constexpr OUStringLiteral sAdjustmentValues(u"AdjustmentValues");
|
|
uno::Any aGeoPropSet = xPropSet->getPropertyValue( sCustomShapeGeometry );
|
|
uno::Sequence< beans::PropertyValue > aGeoPropSeq;
|
|
if ( aGeoPropSet >>= aGeoPropSeq )
|
|
{
|
|
for ( auto& rGeoProp : asNonConstRange(aGeoPropSeq) )
|
|
{
|
|
if ( rGeoProp.Name == sAdjustmentValues )
|
|
{
|
|
uno::Sequence< css::drawing::EnhancedCustomShapeAdjustmentValue > aAdjustmentSeq;
|
|
if ( rGeoProp.Value >>= aAdjustmentSeq )
|
|
{
|
|
auto aAdjustmentSeqRange = asNonConstRange(aAdjustmentSeq);
|
|
int nIndex=0;
|
|
for (auto const& adjustmentGuide : maAdjustmentGuideList)
|
|
{
|
|
if ( adjustmentGuide.maName.getLength() > 3 )
|
|
{
|
|
sal_Int32 nAdjustmentIndex = o3tl::toInt32(adjustmentGuide.maName.subView( 3 )) - 1;
|
|
if ( ( nAdjustmentIndex >= 0 ) && ( nAdjustmentIndex < aAdjustmentSeq.getLength() ) )
|
|
{
|
|
EnhancedCustomShapeAdjustmentValue aAdjustmentVal;
|
|
aAdjustmentVal.Value <<= adjustmentGuide.maFormula.toInt32();
|
|
aAdjustmentVal.State = PropertyState_DIRECT_VALUE;
|
|
aAdjustmentVal.Name = adjustmentGuide.maName;
|
|
aAdjustmentSeqRange[ nAdjustmentIndex ] = aAdjustmentVal;
|
|
}
|
|
} else if ( aAdjustmentSeq.hasElements() ) {
|
|
EnhancedCustomShapeAdjustmentValue aAdjustmentVal;
|
|
aAdjustmentVal.Value <<= adjustmentGuide.maFormula.toInt32();
|
|
aAdjustmentVal.State = PropertyState_DIRECT_VALUE;
|
|
aAdjustmentVal.Name = adjustmentGuide.maName;
|
|
if (nIndex < aAdjustmentSeq.getLength())
|
|
{
|
|
aAdjustmentSeqRange[nIndex] = aAdjustmentVal;
|
|
++nIndex;
|
|
}
|
|
}
|
|
}
|
|
rGeoProp.Value <<= aAdjustmentSeq;
|
|
xPropSet->setPropertyValue( sCustomShapeGeometry, Any( aGeoPropSeq ) );
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
else
|
|
{
|
|
PropertyMap aPropertyMap;
|
|
aPropertyMap.setProperty( PROP_Type, OUString( "ooxml-non-primitive" ));
|
|
aPropertyMap.setProperty( PROP_MirroredX, mbMirroredX );
|
|
aPropertyMap.setProperty( PROP_MirroredY, mbMirroredY );
|
|
if( mnTextPreRotateAngle )
|
|
aPropertyMap.setProperty( PROP_TextPreRotateAngle, mnTextPreRotateAngle );
|
|
if (moTextAreaRotateAngle.has_value())
|
|
aPropertyMap.setProperty(PROP_TextRotateAngle, moTextAreaRotateAngle.value());
|
|
// Note 1: If Equations are defined - they are processed using internal div by 360 coordinates
|
|
// while if they are not, standard ooxml coordinates are used.
|
|
// This size specifically affects scaling.
|
|
// Note 2: Width and Height are set to 0 to force scaling to 1.
|
|
awt::Rectangle aViewBox( 0, 0, aSize.Width, aSize.Height );
|
|
// tdf#113187 Each ArcTo introduces two additional equations for converting start and swing
|
|
// angles. They do not count for test for use of standard ooxml coordinates
|
|
if (maGuideList.size() - 2 * countArcTo() > 0)
|
|
aViewBox = awt::Rectangle( 0, 0, 0, 0 );
|
|
aPropertyMap.setProperty( PROP_ViewBox, aViewBox);
|
|
|
|
Sequence< EnhancedCustomShapeAdjustmentValue > aAdjustmentValues( maAdjustmentGuideList.size() );
|
|
auto aAdjustmentValuesRange = asNonConstRange(aAdjustmentValues);
|
|
for ( std::vector<CustomShapeGuide>::size_type i = 0; i < maAdjustmentGuideList.size(); i++ )
|
|
{
|
|
EnhancedCustomShapeAdjustmentValue aAdjustmentVal;
|
|
aAdjustmentVal.Value <<= maAdjustmentGuideList[ i ].maFormula.toInt32();
|
|
aAdjustmentVal.State = PropertyState_DIRECT_VALUE;
|
|
aAdjustmentVal.Name = maAdjustmentGuideList[ i ].maName;
|
|
aAdjustmentValuesRange[ i ] = aAdjustmentVal;
|
|
}
|
|
aPropertyMap.setProperty( PROP_AdjustmentValues, aAdjustmentValues);
|
|
|
|
PropertyMap aPath;
|
|
|
|
aPath.setProperty( PROP_Segments, comphelper::containerToSequence(maSegments) );
|
|
|
|
if ( maTextRect.has_value() ) {
|
|
Sequence< EnhancedCustomShapeTextFrame > aTextFrames{
|
|
{ /* tl */ { maTextRect.value().l, maTextRect.value().t },
|
|
/* br */ { maTextRect.value().r, maTextRect.value().b } }
|
|
};
|
|
aPath.setProperty( PROP_TextFrames, aTextFrames);
|
|
}
|
|
|
|
if (!maConnectionSiteList.empty())
|
|
{
|
|
css::uno::Sequence<EnhancedCustomShapeParameterPair> seqGluePoints;
|
|
seqGluePoints.realloc(maConnectionSiteList.size());
|
|
sal_Int32 nId = 0;
|
|
for (auto& rGluePoint : asNonConstRange(seqGluePoints))
|
|
{
|
|
rGluePoint.First.Value = maConnectionSiteList[nId].pos.First.Value;
|
|
rGluePoint.First.Type = maConnectionSiteList[nId].pos.First.Type;
|
|
rGluePoint.Second.Value = maConnectionSiteList[nId].pos.Second.Value;
|
|
rGluePoint.Second.Type = maConnectionSiteList[nId].pos.Second.Type;
|
|
nId++;
|
|
}
|
|
aPath.setProperty(PROP_GluePoints, seqGluePoints);
|
|
}
|
|
|
|
sal_uInt32 nParameterPairs = 0;
|
|
for ( auto const & i: maPath2DList )
|
|
nParameterPairs += i.parameter.size();
|
|
|
|
Sequence< EnhancedCustomShapeParameterPair > aParameterPairs( nParameterPairs );
|
|
auto aParameterPairsRange = asNonConstRange(aParameterPairs);
|
|
sal_uInt32 k = 0;
|
|
for ( auto const & i: maPath2DList )
|
|
for ( auto const & j: i.parameter )
|
|
aParameterPairsRange[ k++ ] = j;
|
|
aPath.setProperty( PROP_Coordinates, aParameterPairs);
|
|
|
|
if ( !maPath2DList.empty() )
|
|
{
|
|
bool bAllZero = true;
|
|
for ( auto const & i: maPath2DList )
|
|
{
|
|
if ( i.w || i.h ) {
|
|
bAllZero = false;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if ( !bAllZero ) {
|
|
Sequence< awt::Size > aSubViewSize( maPath2DList.size() );
|
|
std::transform(maPath2DList.begin(), maPath2DList.end(), aSubViewSize.getArray(),
|
|
[](const auto& p2d)
|
|
{
|
|
SAL_INFO("oox.cscode",
|
|
"set subpath; size: " << p2d.w << " x " << p2d.h);
|
|
return awt::Size(p2d.w, p2d.h);
|
|
});
|
|
aPath.setProperty( PROP_SubViewSize, aSubViewSize);
|
|
}
|
|
}
|
|
|
|
Sequence< PropertyValue > aPathSequence = aPath.makePropertyValueSequence();
|
|
aPropertyMap.setProperty( PROP_Path, aPathSequence);
|
|
|
|
Sequence< OUString > aEquations( maGuideList.size() );
|
|
std::transform(maGuideList.begin(), maGuideList.end(), aEquations.getArray(),
|
|
[](const auto& g) { return g.maFormula; });
|
|
aPropertyMap.setProperty( PROP_Equations, aEquations);
|
|
|
|
Sequence< PropertyValues > aHandles( maAdjustHandleList.size() );
|
|
auto aHandlesRange = asNonConstRange(aHandles);
|
|
for ( std::vector<AdjustHandle>::size_type i = 0; i < maAdjustHandleList.size(); i++ )
|
|
{
|
|
PropertyMap aHandle;
|
|
// maAdjustmentHandle[ i ].gdRef1 ... maAdjustmentHandle[ i ].gdRef2 ... :(
|
|
// gdRef1 && gdRef2 -> we do not offer such reference, so it is difficult
|
|
// to determine the correct adjustment handle that should be updated with the adjustment
|
|
// position. here is the solution: the adjustment value that is used within the position
|
|
// has to be updated, in case the position is a formula the first usage of a
|
|
// adjustment value is decisive
|
|
if ( maAdjustHandleList[ i ].polar )
|
|
{
|
|
// Polar handles in DrawingML
|
|
// 1. don't have reference center, so PROP_Polar isn't needed.
|
|
// 2. position always use planar coordinates.
|
|
// 3. use RefAngle and RefR to specify adjustment value to be updated.
|
|
// 4. The unit of angular adjustment values are 6000th degree.
|
|
|
|
aHandle.setProperty( PROP_Position, maAdjustHandleList[ i ].pos);
|
|
if ( maAdjustHandleList[ i ].gdRef1.has_value() )
|
|
{
|
|
sal_Int32 nIndex = GetCustomShapeGuideValue( maAdjustmentGuideList, maAdjustHandleList[ i ].gdRef1.value() );
|
|
if ( nIndex >= 0 )
|
|
aHandle.setProperty( PROP_RefR, nIndex);
|
|
}
|
|
if ( maAdjustHandleList[ i ].gdRef2.has_value() )
|
|
{
|
|
sal_Int32 nIndex = GetCustomShapeGuideValue( maAdjustmentGuideList, maAdjustHandleList[ i ].gdRef2.value() );
|
|
if ( nIndex >= 0 )
|
|
aHandle.setProperty( PROP_RefAngle, nIndex);
|
|
}
|
|
if ( maAdjustHandleList[ i ].min1.has_value() )
|
|
aHandle.setProperty( PROP_RadiusRangeMinimum, maAdjustHandleList[ i ].min1.value());
|
|
if ( maAdjustHandleList[ i ].max1.has_value() )
|
|
aHandle.setProperty( PROP_RadiusRangeMaximum, maAdjustHandleList[ i ].max1.value());
|
|
|
|
/* TODO: AngleMin & AngleMax
|
|
if ( maAdjustHandleList[ i ].min2.has() )
|
|
aHandle.setProperty( PROP_ ] = maAdjustHandleList[ i ].min2.get());
|
|
if ( maAdjustHandleList[ i ].max2.has() )
|
|
aHandle.setProperty( PROP_ ] = maAdjustHandleList[ i ].max2.get());
|
|
*/
|
|
}
|
|
else
|
|
{
|
|
aHandle.setProperty( PROP_Position, maAdjustHandleList[ i ].pos);
|
|
if ( maAdjustHandleList[ i ].gdRef1.has_value() )
|
|
{
|
|
// TODO: PROP_RefX and PROP_RefY are not yet part of our file format,
|
|
// so the handles will not work after save/reload
|
|
sal_Int32 nIndex = GetCustomShapeGuideValue( maAdjustmentGuideList, maAdjustHandleList[ i ].gdRef1.value() );
|
|
if ( nIndex >= 0 )
|
|
aHandle.setProperty( PROP_RefX, nIndex);
|
|
}
|
|
if ( maAdjustHandleList[ i ].gdRef2.has_value() )
|
|
{
|
|
sal_Int32 nIndex = GetCustomShapeGuideValue( maAdjustmentGuideList, maAdjustHandleList[ i ].gdRef2.value() );
|
|
if ( nIndex >= 0 )
|
|
aHandle.setProperty( PROP_RefY, nIndex);
|
|
}
|
|
if ( maAdjustHandleList[ i ].min1.has_value() )
|
|
aHandle.setProperty( PROP_RangeXMinimum, maAdjustHandleList[ i ].min1.value());
|
|
if ( maAdjustHandleList[ i ].max1.has_value() )
|
|
aHandle.setProperty( PROP_RangeXMaximum, maAdjustHandleList[ i ].max1.value());
|
|
if ( maAdjustHandleList[ i ].min2.has_value() )
|
|
aHandle.setProperty( PROP_RangeYMinimum, maAdjustHandleList[ i ].min2.value());
|
|
if ( maAdjustHandleList[ i ].max2.has_value() )
|
|
aHandle.setProperty( PROP_RangeYMaximum, maAdjustHandleList[ i ].max2.value());
|
|
}
|
|
aHandlesRange[ i ] = aHandle.makePropertyValueSequence();
|
|
}
|
|
aPropertyMap.setProperty( PROP_Handles, aHandles);
|
|
if (!maExtrusionPropertyMap.empty())
|
|
{
|
|
Sequence< PropertyValue > aExtrusionSequence = maExtrusionPropertyMap.makePropertyValueSequence();
|
|
aPropertyMap.setProperty( PROP_Extrusion, aExtrusionSequence);
|
|
}
|
|
|
|
#if OSL_DEBUG_LEVEL >= 2
|
|
// Note that the script oox/source/drawingml/customshapes/generatePresetsData.pl looks
|
|
// for these ==cscode== and ==csdata== markers, so don't "clean up" these SAL_INFOs.
|
|
SAL_INFO("oox.cscode", "==cscode== begin");
|
|
aPropertyMap.dumpCode( aPropertyMap.makePropertySet() );
|
|
SAL_INFO("oox.cscode", "==cscode== end");
|
|
SAL_INFO("oox.csdata", "==csdata== begin");
|
|
aPropertyMap.dumpData( aPropertyMap.makePropertySet() );
|
|
SAL_INFO("oox.csdata", "==csdata== end");
|
|
#endif
|
|
// converting the vector to a sequence
|
|
Sequence< PropertyValue > aSeq = aPropertyMap.makePropertyValueSequence();
|
|
PropertySet aPropSet( xPropSet );
|
|
aPropSet.setProperty( PROP_CustomShapeGeometry, aSeq );
|
|
}
|
|
}
|
|
|
|
}
|
|
|
|
/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
|