The current dependency is already a hack, because there is no way
I know of to depend on delivered top-level modules like more_fonts.
The original patch parses the gb_Package_MODULE_ooo_fonts list of
registered packages to add them as build dependencies.
But this is not sufficient, as it just adds the dependencies on the
installed / unpacked fonts in the workdir (actually it's just the
installer filelist), where they can't be found by the unit test
running in the instdir environment.
So this converts the depndency into a make error, if either the
filelist is missing or the included font files. But if we are in
a full run and know the more_fonts module, we simply depend on its
delivered files.
This needs some minimal changes to gbuild, as neither the delivered
file list nor the modules class names are yet available. And this
moves the fontconfig handling to extras, where the opensymbol font
is already handled.
Change-Id: I1b70a4c45ff189266ce56c57e534ddc45e7c5c19
Reviewed-on: https://gerrit.libreoffice.org/74624
Tested-by: Jenkins
Reviewed-by: Jan-Marek Glogowski <glogow@fbihome.de>
Build spsupp for both x64 and x86, regardless of target platform.
This allows to install the ActiveX component to be used by both
64-bit and 32-bit applications on 64-bit systems (especially IE,
which runs both 64-bit and 32-bit processes simultaneously at
least on Win10), no matter which LO (32/64) was installed.
Move the DLLs from activex feature to ooo, to copy unconditionally.
Registration of LO-specific component will be also unconditional;
registration of replacement of MSO component will need own feature.
This doesn't yet register the component in system: TODO later.
Change-Id: Iccf5e73dfae306cb777f844d40611e23c4520a13
Reviewed-on: https://gerrit.libreoffice.org/71925
Reviewed-by: Mike Kaganski <mike.kaganski@collabora.com>
Tested-by: Mike Kaganski <mike.kaganski@collabora.com>
Drop all GStreamer 0.10 support according to
ESC decision of 2019-06-06.
GStreamer 0.10 is obsolete and no longer needed,
superseded by GStreamer 1.0 which is available in
baseline (RHEL 7 or CentOS 7) and all relevant distros.
Change-Id: Ic317eba04d2c17e141acc983f37fbfa4301c9f3f
Reviewed-on: https://gerrit.libreoffice.org/73619
Tested-by: Jenkins
Reviewed-by: Thorsten Behrens <Thorsten.Behrens@CIB.de>
ViewDocument3 method takes OpenType parameter, which allows to decide
if user can choose opening the document read-only or to edit.
Since we need to show localizable strings, we need to bootstrap part
of LO (l10n), which is impossible when e.g. 64-bit ActiveX DLL tries
to load installed 32-bit sal DLLs. Thus, we need a separate helper
.exe, which architecture matches the rest of installed LO, and which
handles user interaction.
Change-Id: I0ad53ba64272fb84728d2221e3dc85d3eefdda68
Reviewed-on: https://gerrit.libreoffice.org/72355
Reviewed-by: Mike Kaganski <mike.kaganski@collabora.com>
Tested-by: Mike Kaganski <mike.kaganski@collabora.com>
Some OpenCL implementations may be broken, e.g. pocl simply
asserts and aborts if it can't find Clang. In order to protect
against crashes caused by faulty OpenCL drivers, when testing OpenCL
functionality on OpenCL setup change, first do a simple test
in a separate helper.
Change-Id: I1cf328e731c48f47745b27c7130e7521254209f5
Reviewed-on: https://gerrit.libreoffice.org/71080
Tested-by: Jenkins
Reviewed-by: Luboš Luňák <l.lunak@collabora.com>
The code needed just a small amount of ifdefs to use UITextChecker on
iOS instead of NSSpellChecker.
Change-Id: I19edfffd3cc317a79beacc0b94668a6fd5ea3b32
... for easier maintenance. This commit only introduces the
framework. Follow up commits will update the license file.
Advantages:
* single source, multiple outputs (html, txt)
* conditional text, i.e. output will not include license
terms of components that are not configured in the build
Change-Id: I0ffad41119228a0a26fd1b6ce19930ca6085adb2
Reviewed-on: https://gerrit.libreoffice.org/69396
Tested-by: Jenkins
Reviewed-by: Andras Timar <andras.timar@collabora.com>
Since TWAIN is only actually available as 32-bit component on Windows,
to use it in a 64-bit program, we need a 32-bit shim program that does
all actual communication with TWAIN subsystem.
This change reimplements TWAIN implementation to be a separate 32-bit
process. Image is transfered from the shim to main program using file
mapping API.
This reverts most of commit 585d980696.
64-bit LibreOffice doesn't bundle TWAIN DSM library now. TWAIN DSM
source code is still used for TWAIN headers.
Change-Id: I46f178ad36acd97a9eff156624b99036fcbb83f8
Reviewed-on: https://gerrit.libreoffice.org/65688
Tested-by: Jenkins
Reviewed-by: Mike Kaganski <mike.kaganski@collabora.com>
KDE4 is out of maintenance upstream since Nov. 2014, and binaries
provided by TDF have switched to KDE5 as the official backend.
Change-Id: I165465b56d3ba3a18912b203c06ae8fc6111c0c9
Reviewed-on: https://gerrit.libreoffice.org/60014
Reviewed-by: Thorsten Behrens <Thorsten.Behrens@CIB.de>
Tested-by: Thorsten Behrens <Thorsten.Behrens@CIB.de>
Being a GUI application on Windows (with related flag in the executable header
- see https://blogs.msdn.microsoft.com/oldnewthing/20090101-00/?p=19643/), OS
would detect the subsystem before launching the application, and won't attach
the parent console or redirected output handles from it to the application.
Also, different hacks to reattach the GUI application to the console later are
unreliable on different Windows versions, and work improperly (the output goes
to the console after the launch command has already returned, which is wrong
in batch files). This makes it extremily difficult to do CLI operations with
LibreOffice on Windows, with error codes/warnings/messages/output missing or
going to wrong consoles.
Making an executable for CUI subsystem, on the other hand, makes Windows to
allocate a console before starting it when the program is run by itself. This
makes the console window to appear on screen unconditionally, even if it's
hidden later when the program has started. This flashing is undesirable.
But we use a wrapper executable on Windows, called soffice.exe, which is what
actually launched by user, and which runs soffice.bin. This allows us to make
soffice.bin the proper console application, and thus make it capable to behave
properly in CLI scenarios, while avoid the console flashing when run from the
soffice.exe (which would suppress the console creation using DETACHED_PROCESS
creation flag to CreateProcessW).
Also creating a new wrapper for console (soffice.com) allows to use command
lines which omit explicit executable extension (no ".bin"), like this:
"C:\Program Files\LibreOffice\program\soffice" --help
which allows to continue using multiple available help resources unchanged,
since .com extension is tried prior to .exe by Windows' cmd.exe.
Change-Id: I089d0f30f860da6cfc781b4383f6598a08a4d238
Reviewed-on: https://gerrit.libreoffice.org/63572
Tested-by: Jenkins
Reviewed-by: Mike Kaganski <mike.kaganski@collabora.com>
This gets rid of the horrible hack in gbuild.mk to accomodate the
case-incorrect iOS platform makefiles that cannot be renamed without
upsetting git on file systems that sadly lack the case sensitivity
feature.
Keep the macro defined to IOS though.
Change-Id: I1022bfef4900da00e75fc1ccce786b20f8673234
Reviewed-on: https://gerrit.libreoffice.org/62705
Tested-by: Jenkins
Reviewed-by: Michael Stahl <Michael.Stahl@cib.de>
Reviewed-by: Tor Lillqvist <tml@collabora.com>
Tested-by: Tor Lillqvist <tml@collabora.com>
And also make some minor fixes so it cooperates with the new mysqlc
library.
Change-Id: I866add99a699150c6550ee7f7ff2ee947e07117c
Reviewed-on: https://gerrit.libreoffice.org/61648
Tested-by: Jenkins
Reviewed-by: Tamás Bunth <btomi96@gmail.com>
since it has nothing to do with the headless command line option, so
use the name it has in the configure.ac file
Change-Id: Ibf0615ed02695d6e48a797f5632e4f417c010c70
Reviewed-on: https://gerrit.libreoffice.org/59611
Tested-by: Jenkins
Reviewed-by: Noel Grandin <noel.grandin@collabora.co.uk>
Additionally I erased the remains of the old mysql C++ connector.
Also update the code where the clang plugins were unhappy after moving
the mysqlc module.
Remove mysql-cpp-connector external.
Change-Id: I771cc7afacf5012fc349afb6b36828fb0fee5a66
Reviewed-on: https://gerrit.libreoffice.org/59200
Tested-by: Jenkins
Reviewed-by: Tamás Bunth <btomi96@gmail.com>
...that previously ended up in language-independent parts of installation sets.
The structure of that media/ tree doesn't allow to directly mis-use the existing
AllLangPackage machinery (which expects the language to be encoded in the first
pathname segment within the tree; and which is already mis-used for the
helpcontent2/AllLangPackage_html_lang.mk parts).
So introduce gb_AllLangPackage_add_files_for_lang that allows to specify the
language explicitly, independent of where it is encoded in the pathname (if at
all). The underlying gb_AllLangPackage_add_file sets a
gb_AllLangPackage_ALLDIRS that is used by `make packageinfo`, which may need
further fixing by anybody actually using that target; see the mail thread
starting at
<https://lists.freedesktop.org/archives/libreoffice/2018-May/080242.html>
"Broken --with-help=html `make packageinfo`".
All files in $(SRCDIR)/helpcontent2/source/media/ must now explicitly be listed
in either helpcontent2/Package_html_media.mk (for the language-independent
files) or helpcontent2/AllLangPackage_html_media_lang.mk (for the language-
specific files). Also note the two TODOs in
helpcontent2/AllLangPackage_html_media_lang.mk.
What is not quite right yet is that content from
helpcontent2/AllLangPackage_html_lang.mk and
helpcontent2/AllLangPackage_html_media_lang.mk is ending up in both per-language
helpcontent installation sets (as intended, via the instructions in
helpcontent2/CustomTarget_html.mk) and per-language languagepack installation
sets (which is unintended). This needs to be fixed with a follow-up commit.
This is the core part of a commit spanning core and helpcontent2.
Change-Id: Ib29e52cf8a3ca7bcd234a8f6919c8eac6157cdbf
Target of this change is to get rid of the SVGFilter
in current LO which is based on the standard-ODF importer
using it's functionality by passing in/handing over
temporary created XML-Stream-Data.
First step is to alternatively import the given SVG
file to a newly created Document and to strip the
existing Filter-Code.
Adding the first prototype of the changed import. It
is capable of importing the given SVG to the created
Draw/Impress document. It adds the SVG which gets imported
by SVGIO as GraphicObject. It adapts sizes and positions of
Page and GraphicObject to have a smooth import.
Adding stripping of SVGFilter and used ressources. Done
as deep as possible, hopefully all places found.
Adapted now to create an Impress document. Also added needed
adaptions to PageSize(s), including layout and PresObj stuff
to make all MasterPages/LayoutPages work correctly.
Added reaction on empty SVG. This is needed since the
PageSize is adapted to the Graphic. With empty Graphic
a Size(0,0) results and this goes wrong.
Change-Id: Ia364a5783bee7dadcbe91e700efbabc121cf98f9
Reviewed-on: https://gerrit.libreoffice.org/54096
Tested-by: Jenkins <ci@libreoffice.org>
Reviewed-by: Armin Le Grand <Armin.Le.Grand@cib.de>
in page number, chapter and outline numbering
in ~30 languages by integrating libnumbertext library.
- offapi: add linguistic2::NumberText
New NumberingType constants:
- ordinal indicators (1st, 2nd, 3rd...)
- cardinal number names (One, Two, Three...)
- ordinal number names (First, Second, Third...)
Note: these numberings are parts of OOXML, too.
Plain text files of Libnumbertext's language data
are installed in share/numbertext (similar to
share/fingerprint), allowing further customization.
Change-Id: I4034da0a40a8c926f14a3f591749a89a8d807d5a
Reviewed-on: https://gerrit.libreoffice.org/53313
Tested-by: Jenkins <ci@libreoffice.org>
Reviewed-by: László Németh <nemeth@numbertext.org>
This backend provides Active Directory details for current user. If
the system is not part of Active Directory domain, GetUserNameEx is
used instead, so at least user (given) name is configured.
Unlike ldap backend, this one doesn't need connection configuration,
as the used API works with current user security context.
Change-Id: I74bcc79591a658dc5121df1f09caa15d272fbe12
Reviewed-on: https://gerrit.libreoffice.org/53590
Tested-by: Jenkins <ci@libreoffice.org>
Reviewed-by: Mike Kaganski <mike.kaganski@collabora.com>
...by extending the hackery in helpcontent2/CustomTarget_html.mk (see comment
there). (Ultimately, the gbuild HelpTarget machinery should probably be adapted
to the needs of this new help format, once the old help format is no longer
supported?)
The Perl packaging code finds source files through the "include" paths specified
in instsetoo_native/util/openoffice.lst.in. To avoid potential name clashes,
put the new .filelist files into
workdir/CustomTarget/helpcontent2/help3xsl/filelists/html-help/ sub-directories.
read_filelist in solenv/bin/modules/installer/filelists.pm does not strip white
space following the last item in a file list, but (with HAVE_GNUMAKE_FILE_FUNC)
the gb_HelpTarget_get_translation_target .filelist files (which are then
transformed with sed into the .html .filelist files read by the Perl packaging
code) may contain such trailing white space. So $(strip ...) their content in
solenv/gbuild/HelpTarget.mk.
This is the core part of a change spanning core and helpcontent2.
Change-Id: I82e0093ea2064725327330c5485f8e581573e1f2
Using nested install is bad because (1) MS advises against it (though it
most possibly doesn't relate to our specific case, when we install the
vc redist exe package in UI part, so actually only a single MSI session
is active at any time); (2) because it adds some extra interactions
(user sees something "unrelated" being installed, which raises concerns;
additional admin authentication required); and (3) because it runs in
InstallUISequence, thus only installing the UCRT when doing interactive
installation (unattended installs, including GPO, need to install UCRT
separately).
This patch aims to incorporate the original UCRT MSU (Windows Update)
packages (https://support.microsoft.com/en-us/help/2999226) available as
a zip archive from
https://www.microsoft.com/en-us/download/details.aspx?id=48234
- the same as used in VC redists for VS 2015 and 2017. This obsoletes
the separate installation of the redist; since we also have the redist
as merge module in our MSI, that is enough (and removes redundancy).
The MSUs are installed using wusa.exe in a custom action (deferred,
non-impersonating).
As a small bonus, embedding MSUs instead of redist EXE allows us to
shrink the size of installer a little (~10 MB).
As deferred custom actions cannot access current installer database,
we workaround this by using initial immediate impersonating action to
extract the binaries into a temporary location. To ensure that the file
gets removed upon completion (both successful and failed), we use an
additional cleanup action.
Commit 61b1d63133 is effectively reverted.
Change-Id: I1529356fdcc67ff24b232c01ddf8bb3a31bb00bd
Reviewed-on: https://gerrit.libreoffice.org/52923
Tested-by: Jenkins <ci@libreoffice.org>
Reviewed-by: Mike Kaganski <mike.kaganski@collabora.com>
...in preparation of packaging the per-locale data properly.
non-locale: GeneratedPackage_html_media
Package_html_dynamic
Package_html_static
per-locale: GeneratedPackage_html_lang_generated
Package_html_lang
This is the core part of a change that spans core and helpcontent2.
Change-Id: I0e014649129f9ec498e5307c64807efa95eee0de
As a first step, include all the instdir/help/* content that comes from
helpcontent2 (there's also some *.xsl files there coming from xmlhelp?) in the
ooo base module:
instdir/help/default.css
fuse.js
help.html
help.js
help2.js
hid2file.js
index.html
media/
normalize.css
paginathing.js
en-US/
<any other locale>/
The locale-independent parts could remain in the ooo base module or could be
split out into some help module (esp. the media/ tree may grow large?). The
per-locale sub-dirs will definitely need to be split into locale-specific
modules in a next step.
Change-Id: I3e7b1b0e9c965372a23a51ed8ddc809e395fd891
Reviewed-on: https://gerrit.libreoffice.org/53213
Tested-by: Jenkins <ci@libreoffice.org>
Reviewed-by: Stephan Bergmann <sbergman@redhat.com>
We cannot silently convert user data or their used file formats
and then await them to accept it or reinstall an older version.
Let us make a soft change instead of an hard (heart) break
and avoid us to been attacked with fire and forks from our users.
This reverts commit 8d381ae8d6.
Change-Id: Ia153640935e355771acb85cf652f8fe4c21fafbb
Reviewed-on: https://gerrit.libreoffice.org/52731
Tested-by: Jenkins <ci@libreoffice.org>
Reviewed-by: Tamás Bunth <btomi96@gmail.com>
Gabor Kelemen