...for a localized property that doesn't have a suitable value, but is nillable.
E.g., /org.openoffice.Office.Writer/Insert/Caption/CaptionOrderNumberingFirst
(once fixed to indeed be a localized property as apparently intended, with a
follow-up commit to this) only has an explicit value (true) for xml:lang="hu",
but shouldn't return that for any other locale (where the implicit default for a
nil value should instead be false, cf. the else branch at the end of
SwInsertConfig::Load, sw/source/uibase/config/modcfg.cxx).
Change-Id: I7b991c1bc4df22bf2359175b0734e85e0844ce99
Reviewed-on: https://gerrit.libreoffice.org/49409
Tested-by: Jenkins <ci@libreoffice.org>
Reviewed-by: Stephan Bergmann <sbergman@redhat.com>
Previosly (since commit 9ac98e6e34)
it was expected to gradually remove SAL_U/W usage in Windows code
by replacing with reinterpret_cast or changing to some bettertypes.
But as it's useful to make use of fact that LibreOffice and Windows
use compatible representation of strings, this commit puts these
functions to a better-suited o3tl, and recommends that the functions
be consistently used throughout Windows-specific code to reflect the
compatibility and keep the casts safe.
Change-Id: I2f7c65606d0e2d0c01a00f08812bb4ab7659c5f6
Reviewed-on: https://gerrit.libreoffice.org/43150
Tested-by: Jenkins <ci@libreoffice.org>
Reviewed-by: Mike Kaganski <mike.kaganski@collabora.com>
This is type-safe, and allows to catch cases where a source type
is changed for some reason, but reinterpret_cast masks that
Change-Id: Ib64b6fa2e22d94a6bba890f0ccc3e20325c6f0a1
Reviewed-on: https://gerrit.libreoffice.org/42961
Tested-by: Jenkins <ci@libreoffice.org>
Reviewed-by: Mike Kaganski <mike.kaganski@collabora.com>
There are apparently various places that want to check for a Unicode scalar
value rather than for a Unicode code point. Changed those uses of
rtl::isUnicodeCodePoint where that was obvious. (For changing
svtools/source/svrtf/svparser.cxx see 8e0fb74dc0
"Revert 'svtools: HTML import: don't put lone surrogates in OUString'".) Other
uses of rtl::isUnicodeCodePoint might also want to use rtl::isUnicodeScalarValue
instead.
As a side effect, this change also introduces rtl::isSurrogate, which is useful
in a few places as well.
Change-Id: I9245f4f98b83877145a4d392f0ddb7c5d824a535
There is lots of (Windows-only) code that relied on sal_Unicode being the same
as wchar_t, and the best change may be different in each case (and doing the
changes may be somewhat error prone). So for now add SAL_U/SAL_W scaffolding
functions to sal/types.h, remove their uses one by one again, and finally drop
those functions again.
Change-Id: I2cc791bd941d089901abb5f6fc2f05fbc49e65ea
Reviewed-on: https://gerrit.libreoffice.org/36077
Tested-by: Jenkins <ci@libreoffice.org>
Reviewed-by: Stephan Bergmann <sbergman@redhat.com>
Read also a type value from registry so user can specify
a type for a property of an extensible group.
Change-Id: I4105ba559a64ce96bfe5a390660ad7f349ba894c
Reviewed-on: https://gerrit.libreoffice.org/34961
Tested-by: Jenkins <ci@libreoffice.org>
Reviewed-by: Stephan Bergmann <sbergman@redhat.com>
This reverts commit 8cfda72061. The problem in
that issue is that the configmgr/source/winreg.cxx code generates .xcu data
where such an extension prop doesn't have an oor:type attribute, which is not
allowed. On the other hand, it is important that the PropertyNode representing
such an extension prop has a staticType_ of TYPE_ANY, so that later layers or
programmatic calls can store values of different type.
...from function definitions occurring within class definitions. Done with
a rewriting Clang plugin (to be pushed later).
Change-Id: I9c6f2818a57ccdb361548895a7743107cbacdff8
Reviewed-on: https://gerrit.libreoffice.org/34874
Tested-by: Jenkins <ci@libreoffice.org>
Reviewed-by: Stephan Bergmann <sbergman@redhat.com>
In general, properties' type is read from scheme files (xcs)
but scheme files can contain property groups without a type
(extensible groups). In this case the xcd files defines the actual
properties and their type.
handleUnknownGroupProp() method is called when a property is
not defined in the scheme file. Here we have the type information
read from xcd file, so use it instead of setting it to any
Change-Id: I4180d154ecf4130ecbb9c808cee6529124842790
Reviewed-on: https://gerrit.libreoffice.org/34859
Reviewed-by: Tamás Zolnai <tamas.zolnai@collabora.com>
Tested-by: Tamás Zolnai <tamas.zolnai@collabora.com>
...(for now, from LIBO_INTERNAL_CODE only). See the mail thread starting at
<https://lists.freedesktop.org/archives/libreoffice/2017-January/076665.html>
"Dynamic Exception Specifications" for details.
Most changes have been done automatically by the rewriting loplugin:dynexcspec
(after enabling the rewriting mode, to be committed shortly). The way it only
removes exception specs from declarations if it also sees a definition, it
identified some dead declarations-w/o-definitions (that have been removed
manually) and some cases where a definition appeared in multiple include files
(which have also been cleaned up manually). There's also been cases of macro
paramters (that were used to abstract over exception specs) that have become
unused now (and been removed).
Furthermore, some code needed to be cleaned up manually
(avmedia/source/quicktime/ and connectivity/source/drivers/kab/), as I had no
configurations available that would actually build that code. Missing @throws
documentation has not been applied in such manual clean-up.
Change-Id: I3408691256c9b0c12bc5332de976743626e13960
Reviewed-on: https://gerrit.libreoffice.org/33574
Tested-by: Jenkins <ci@libreoffice.org>
Reviewed-by: Stephan Bergmann <sbergman@redhat.com>
Added own directory in User config to where the
saved content is written and taken from, adapted
to also handle ExtensionConfiguration, changed
point for creating backups of configuration to
doShutdown, create no configuration when a restart
is triggered (untested configuration)
Change-Id: Id7a96195b765842c31cacf81cc08d2965a205281
Reviewed-on: https://gerrit.libreoffice.org/29729
Tested-by: Jenkins <ci@libreoffice.org>
Reviewed-by: Armin Le Grand <Armin.Le.Grand@cib.de>
Added default values for SecureUserConfig values
to soffice.ini/rc which enable the mechanism,
enable by default and set a maximum of three backups
file in packed form. Added more handy flag for easy
decision to add compressed/uncompressed.
Change-Id: I5a624c09fec4e4278314e13fc5f693ac085d5e61
Enhanced helper classes for BackupFileHelper to
allow writing a stack of rescued last valid
configuration files to a single file package.
Added configuration values for enabling this and
defining the number of entries, added max entry
limitation. Using FileSize and CRC32 now to dectect
if config file did change. To make this work I added
sorting to writing the configuration so that with no
change the same configuration file is written.
Use std::vector for better mem performance for sorting,
defined static const for buffer size of manipulation,
prepare inflate/deflate usages. Fixes to setPos, warnings
Change-Id: Ib286e2a3f25b0085a1e3ae4f50c9ff1ff3a5dcf5
Julien Nabet